Moisture Analyzer DR 166 (With or Without Printer)
Moisture Analyzer use halogen lamp as a heating source, warming rapidly and uniformly heating. Intelligent software, humanized keyboard layout with large and clear back-LCD display so that the operators process more simple, and compact, strong adaptability Widely applied to industrial, agriculture , medicine and laboratory fields. some typical applications tobacco ,paper, food, tea, corn, chemical ,row materials, pharmaceutical material and textile materials etc..
Description
-
Three analyzing mode.
Auto mode：when the weight of evaporated water in every minute is below 1mg, the testing will stop automatically.
Time mode：Finish testing within the preset time.
Manual mode：Start or Stop testing by pressing “START” or “STOP” key.
-
Three heating mode.
Normal heating mode : Heating up to the set temperature directly after start.
Quick heating mode: in first 5 minutes after Start, heat at high power that used at 150
degree , then, decrease and adjust the power of heating to make temperature at set point.
Slow heating mode : Heat at a reasonable power to make temperature go up gradually
then keep the temperature at set point.
Technology parameters:
| Weight range | Readability | Measuring scope | Data output |
| 0-100g | 0.01%/0.001g | 0.2%-100% | bidirectional RS232 communication |
| Heater | Setting Temperature | Environment Temperature | POWER |
| 300W Halogen lamp | 50℃-150℃ | 10℃~40℃ | AC220V±10% 50Hz±1Hz |
| Pan size | Dimes ion | Weight | Recommended analycal weight |
| Φ95mm | 370×260×230mm | 8.5kg | 1-10g |
| Display content | Standard configuration | ||
| Moisture percentage, weight of sample, analyze and heating mode, sample No., preset temperature, preset time and running time. | 1pcs communicate line; 1pcs power line; 2pcs sample pans; 1pcs Manual; | ||
